1 / 4
40mm Blower Fan Adapter for Briss Fang — zdjęcie 1
1 / 4

40mm Blower Fan Adapter for Briss Fang

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I print in PETG quite often and found the 40mm fans the fang was designed for gave to much air flow even dialed right…

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I print in PETG quite often and found the 40mm fans the fang was designed for gave to much air flow even dialed right down to print PETG. So I made an adapter for the stock 40mm blower fan that can be quickly installed when I want to print PETG.

It works very well. I have no issues printing PETG with the Fang now.

Prints in 2 pieces, the main body of the adapter and the top cover for the air duct. Simply glue the cover to the main body. I made it this way to eliminate the need for supports and keep the duct lines nice and clean.

You will need to mount the adapter to the fang before attaching the blower fan as 2 of the mounting screws are located under where the fan mounts.

Requires 4 M3x8mm screws to mount the adapter to the fang. Uses the stock screws for the blower fan.

I printed in PETG to match the Fang I printed but PLA is a reasonable choice as there is no heat issue where the adapter is mounted.

Hope this is of use to some body.

Print Settings

Printer:

Voxelab Aquila N32

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20% Honeycomb

Filament:

eSun PETG

Transparent Blue


Notes:

Sliced in S3D

For the main body in PETG:

0.2 layer height

3 layers top and bottom

2 walls

20% infill with split process for 30% rectalinear infill 3 layers blow tops.

For the top in PETG

0.2 layer height

4 layers bottom and 3 layers top (makes it solid with no infill)

2 walls

20% infill

If your using PLA then you will have better bridging ability so the above settings aren't as critical.

How I Designed This

Category: 3D Printer Parts

Tagi