quiet PSU case for Snapmaker 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU case for the Snapmaker 2.0, cooled by a single silent fan.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1064
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Warning: If you modify your PSU you should know what you are doing and be aware of possible dangers! Touching the wrong parts (like charged capacitors can kill you)
I recommend to leave the PSU without power connection for at least one day. But even after that you should proceed carefully.
That said: I removed both fans (the external and the internal) as well as the cover of the actual PSU. In the Housing of the new Case I placed a silent 80 mm fan. It's important, that you connect the 3rd Pin to the sensor input of from the old external Fan, other wise the LEDs will blink red as a sign that the external fan stopped working. The power supply for the internal fan is 12V, the external one will give you 24V.
Connecting the three parts will be a bit tricky since there is no big tolerance. I glued every thing together with silicon to be able to split it apart later if i necessary (e.g. for changing the fan) - but feel free to da a remix with a better connection.