Flykey Rafale V1 Faceplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First attempt to make a comfortable and more "human-shaped" faceplate for the Flykey FPV goggles. Best printed…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
First attempt to make a comfortable and more "human-shaped" faceplate for the Flykey FPV goggles.
Best printed standing up.
The inner shape is taken from Ski goggles and needs some foam padding.
The outer shape is Flykey plus some double sided tape or similar.
Faceplate_V2 : major rework! "The Nose" Edition!-)
Faceplate_V3 : With V2 I had some light leakage at the straps. So I made the inner shape a tighter radius. I also went from 3mm base thickness to 2mm to get the screens closer to my eyes. And I added cut-outs for the Diopter lens pull-tabs!
edit: I've added a Foam cutting Template! Its just the inner surface unrolled with some tweeks here and there.
I'm currently testing this as an nice and easy to get Foam sheet. Foam is on the harder side but looks very durable and has that lovely latex feel to it!-)
Category: R/C Vehicles