Bebek PN-103 stripboard bumber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bumber that fits perfectly around a Bebek P/N-103 electronics stripboard. Simply P/N-103 is a 95mm x 70mm piece of…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A bumber that fits perfectly around a Bebek P/N-103 electronics stripboard. Simply P/N-103 is a 95mm x 70mm piece of stripboard with a special copper pattern and holes in the corners.
This bumber will hold the board off the floor so there is enough space for solderings on the underside of the board. There are screwholes in the corners, so the board can be screwed to the bumber or with the bumber to some other container.
Of course this can be used with any stripboard of the same size or it can be resized to fit some other board. Original FreeCAD file included.
Instructions
This is very easy to print.
I printed it flat on it's back. Used PLA with 0.2mm layer height and 20% infill.
Category: Electronics