Ryper MMU2+1S 10 Colors v2

Ryper3d improvements continue ;)

v2 improvements:

• Improved and most robust design
• New stylized electronic case
• Added new IDLER using GT2 20T coupler, improved IDLER live and performance
• Added new PTFE front/rear holder using ECAS04, improve filament angles and PTFE degradation
• Use the new Splitter Ryper v3 with ECAS04
  https://www.printables.com/model/174408-mini-splitter-v3-for-mmu21s

Here you have new v2 Ryper MMu2+1s 10 Colors!!!

• You can use the assemble guide from Prusa MMu2+1s (ignore the selector assembly part) you can drill the idler part for easy assembly
• You can get Einsy and MMU2S board firmware from our Drive
  https://drive.google.com/drive/folders/1kjt-5bZwh5MXXoJohErLqhp4MsBPCsmb?usp=sharing or from our Github https://github.com/Ryper3D/MMU2-1S_Firmware/releases (MMU) / https://github.com/Ryper3D/Prusa-Firmware-mmu2/releases (printer)
  Use FWxxxx-10C.hex for Einsy
  Use MMxxxx-10C.hex for MMU
• BOM, firmware, and Profile for 10 Colors:
  https://docs.google.com/spreadsheets/d/1KP2NGq6YqiG2uNyMTgRr8N01CVqFZkKQ/edit?usp=sharing&ouid=114648168300731631599&rtpof=true&sd=true
• Print with 0.2 quality - 2/3 perimeters, 20% infill - Use raft depending on your machine performance
• You need to use our splitter Ryper v2 edition for MMu2+1s:
  https://www.prusaprinters.org/prints/62928-mini-splitter-for-mmu21s-mod

Recommended print settings:

• Material: recommended PETG or ASA/ABS… PLA should work too
• 0.2 mm layer height QUALITY preset, 3 perimeters or more
• Infill: 20% GRID

Online kits available:

Full kit - https://www.3dboom.es/3dboom/347-2695-ryper-kit-mmu10.html#/145-mmu_polea_20_dientes-0/147-mmu_motor_ldo-0/150-mmu_motor_frio_ldo-0

Upgrade kit from MMU5 - https://www.3dboom.es/inicio/349-2749-ryper-kit-actualizacion-de-mmu5-a-mmu10.html#/145-mmu_polea_20_dientes-0/147-mmu_motor_ldo-0/150-mmu_motor_frio_ldo-0/155-mmu_tornilleria_mmu10-0