FJ Cruiser Handle mount for RAM MOUNT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: NOT RECOMMEND FOR FJ CRUISER WITH A-PILLAR AIR BAG, WHERE IT COULD CAUSE INJURY IN CASE OF ACCIDENT. The is FJ…
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 2597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
NOTE: NOT RECOMMEND FOR FJ CRUISER WITH A-PILLAR AIR BAG, WHERE IT COULD CAUSE INJURY IN CASE OF ACCIDENT.
The is FJ Cruiser Handle bracket for RAM Mount (RAM-B-238U)
- You could use the OEM handle bolt no additional bolt is required.
This Idea inspired by: https://www.thingiverse.com/thing:4246610
To complete the setup you could print:
1x RAM Mount Diamond Ball Base (RAM-B-238U) : Attached File
1x RAM Mount Double Socket (RAM-B-201U) : https://www.thingiverse.com/thing:267879
1x 1" to 17mm Ball Socket: Attached File
-Update 12/12/2021 : Reduce the overhang for more rigidity.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
50-70
Filament:
Generic ASA-ABS-PETG
Notes:
Increase the wall and roof layers to 2mm
Use heat resistance material
Category: Automotive