1 / 9
Toyota FJ Cruiser rear window (lock open)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to lock the rear window open at 30mm -Need a key to remove the hook, and could be stored on one of the gas…
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 467
- Wydruki
- 3
- Wyświetlenia
- 3004
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 7)Remiksy (0)Kolekcje (60)Powiązane
This is to lock the rear window open at 30mm
-Need a key to remove the hook, and could be stored on one of the gas strudes.
Update :
- Support is not needed
- Improved fit
- Enhanced lock for the window
*Note:
-leaving the windows open will make the car vulnerable, Don't leave the car unattended.
-And don't drive with the rear window open, this may break the rear window especially on rough roads.
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30-50
Filament: General ABS- ASA- PETG
Category: Automotive