Kyosho buggy center diff cover , With center diff-lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kyosho Inferno ve center diff cover Normal diff cover (To eliminate the wall from leaking oil increasing wall thicks…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Kyosho Inferno ve center diff cover
Normal diff cover (To eliminate the wall from leaking oil increasing wall thicks is advisable )
Two types for the diff lock
-Type 1 uses M3 hex grub screw shaft.
-Type 2 use two M3 hex grub screw at each side and the original shaft in the middle.
Use 8x16x5mm bearing
Print Settings
Printer Brand:
Ultimaker
Printer:
Ultimaker 2
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.15
Infill:
30-50
Filament:
General ABS
Notes:
Wall thickness 1-2 mm
Category: R/C Vehicles