1 / 3
Zombiecide 2nd Edition - Zombie's Upgrade kit Card Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Card holder for Zombiecide 2nd edition Zombies Upgrade Kit. Holds all the Zombie cards group by each type.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 850
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
Simple Card holder for Zombiecide 2nd edition Zombies Upgrade Kit.
Holds all the Zombie cards group by each type. No Companion or Abomination slots.
It is labeled on the side to assist in grabbing the correct zombies you wish to use.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Infill:
10
Filament:
3D Printing Canada Value PLA PLA
Orange
Notes:
I used a raft, as I had bed adhesion issues with that filament, but defiantly not needed.
Category: 3D Printing