1 / 7
Halter - Dachluke, Fenster und Dachhaube für Wohnwagen (holder roof hood caravan) — zdjęcie 1
1 / 7

Halter - Dachluke, Fenster und Dachhaube für Wohnwagen (holder roof hood caravan)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Kurz mit TinkerCad ersatz für die in die Jahre gekommenen und spröden Halter der Dachluke gebastelt und mit ABS…

Ocena
5 / 5
Polubienia
26
Pobrania
172
Wydruki
4
Wyświetlenia
1511
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Ersatz-Halterung für Dachluke (Wohnmobil / Caravan / Boot)

Mit TinkerCad habe ich einen schnellen Ersatz für die spröden und gebrochenen Halter meiner Dachluke konstruiert und in ABS gedruckt – so konnte der Urlaub gerettet werden.
Der Halter ist nun seit 2018 problemlos im Einsatz, die Luke musste nicht ausgetauscht werden.

👉 TinkerCad-Modell hier

Druckeinstellungen

  • Drucker-Marke: Anet

  • Drucker-Modell: A8

  • Raft: Nein

  • Support: Nein

  • Auflösung: 0,2 mm

  • Infill: 50 %

  • Material: ABS (weiß, No-Name)

Für meine zweite Dachluke starte ich nun zusätzlich einen Langzeittest mit PETG. Dafür habe ich das Design etwas angepasst und das Loch für die Feder etwas tiefer ausgeführt. So möchte ich testen, ob sich PETG bei dieser Anwendung ebenfalls dauerhaft bewährt.

Kategorie: Automotive

🇬🇧 English

Replacement Bracket for Roof Hatch (RV / Caravan / Boat)

I designed a quick replacement bracket for my roof hatch in TinkerCad after the old ones became brittle and broke. Printed in ABS, it saved our holiday trip.
The part has been working flawlessly for since 2018, no need to replace the hatch itself.

👉 TinkerCad model here

Print Settings

  • Printer Brand: Anet

  • Printer Model: A8

  • Rafts: No

  • Supports: No

  • Resolution: 0.2 mm

  • Infill: 50 %

  • Filament: ABS (white, generic)

Category: Automotive

For my second roof hatch, I am now also starting a long-term test using PETG. I slightly modified the design and made the hole for the spring a little deeper. The goal is to see whether PETG can also withstand long-term use in this application.

Tagi