Screwless vinyl record wall holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for vinyl records that uses large command velcro strips instead of screws.
- Ocena
- 4,933 / 5
- Polubienia
- 339
- Pobrania
- 3059
- Wydruki
- 16
- Wyświetlenia
- 12 349
- Oceny
- 15
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall mount that uses large size velcro command strips instead of of screws. Based on the math I have done, only half a strip on each side is necessary for a standard record, but I recommend using one full strip just in case. This also gives you the capacity for 2xLPs on the mount. There is space in the back channel for two command strips with the pull tab overlapping, so that albums with more than 2 records can be held up securely. This should mount close to flush with the wall, with the strips barely reaching out. New version includes a chamfer to reduce bridging needed which allows for the command strip to fit in easier.