Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 1
- Wyświetlenia
- 717
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees placing the screen at a more ergonomic height (using an external keyboard & mouse).
Print fit-test
Take 10 minutes to download and print the sizing key and test its fit to the keyboard end of your laptop. If it doesn't fit, don't bother printing the whole stand.
Printing
This is an easy print if printed as oriented on the side. Doing so orients the perimeter lines favorably for structural soundness. No need for more resolution than 0.3 mm layer height. No supports. Shouldn't require a brim or raft either.
Use
Once printed, the stand either snaps on from the bottom or can be slid on from the side. Note there is a channel for the rubber strip. It should be a perfect fit: nice and close without being tight. To remove, slide off to either side.