Magnetic Cooling System - Plotter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pen plotter mount for JIMIT5's RBJ Magnetic Cooling System.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A pen plotter mount for JIMIT5's RBJ Magnetic Cooling System. Made using rbreen's Creality Ender 3 pen mount.
The base plate from the magnetic cooling system is required for this.
You'll probably need to print the base with supports in the square opening. Print the mount as it's oriented in the stl with supports on the bottom.
You'll need four 12mmx4mmx1.5mm magnets. You can get them out of a 1000kv BLDC motor.
Super glue the magnets into the slots, making sure to get the polarity right, and super glue the square on the back of the pen mount into the recessed square on the base.
You'll need two small rubber bands to keep the pen in place.