Samsung Galaxy Note 8 ZeroLemon 10,000mAh Battery Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement soft case designed due to the product being out of production, and out of stock everywhere
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 815
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My ZeroLemon Samsung Galaxy Note 8 10,000mAh battery case started ripping open shortly before Rapid + TCT 2022. I was hoping I could glue it back together until I could get my hands on a 3D scanner, but even with a matte coating, turntable scanners couldn't muster a useable model during the expo. When I got home I started working backwards from a mesh of a Note 8, and spent way too long trying to run too many triangles through Fusion 360 with 8GB of RAM, so in the event anyone finds themselves in a similar situation, here's your obscure aftermarket case for a long outdated phone. I'll be modding it for a new 20,000mAh battery pack soon, since my battery management boards have a fair bit of corrosion and pack swell, so if you're interested in that new build, let me know.
I printed in IC3D SEBS-TPE-95A, and the hand feel is incredible. I laid the model flat on its back (but modelled in geometry to allow vertical printing with reduced headaches) using a 5mm brim and paint on supports for the bridges at the base with 2mm spacing, 0.2mm Z offset, 100% X/Y offset in Super Slicer, and they came right off.
The Bixby button and stylus ports are omitted since I never use them, but if you must have them, let me know and I can punch out a few extrudes for you. I also took the liberty of making most of the sides flat for easy standing in several orientations.