Lithophane Lighted Hanging Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Check out my hanging lithophane holder! It would make a great customized gift. The frame lighted by thru a hole in the…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Check out my hanging lithophane holder! It would make a great customized gift.
The frame lighted by thru a hole in the back and it has a loop at the top for hanging. The inside is shaped to reflect light onto the lithophane. If you print in a dark color you may need to paint the inside or line it with metal foil.
The lithophanes are created using the generator on this site: https://tool.itslitho.com/CreateModel
The dimensions to fit the frame are in the images.
Once printed snap the lithophane into the frame, insert a light into the back, and hang it from the loop at the top.
If you love my designs, please support me by leaving a small tip. It helps me make future projects.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2 max
Infill:
40%
Filament: Any PLA or PETG White
Notes:
Print the Lithophanes vertically (on edge) using the settings in the image in white filament. I used support, but found the part does actually touch the supports so was not really necessary. I used .1 layers to get better a better quality image.
The frame, print .2 or smaller in any color you like. I painted mine silver afterward to better reflect the light. I used .3 layers in the pictures and it is a bit rough. The previous iteration I printed at .2 and looks better. I printed it with the convex side on the bed with graduated supports. Using them will take a few hours off the print time and save materials.Category: Decor