1 / 8
Floss 3 Analog Command Center - aofpv remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE May 2022: rebuilt and cleaned up I re added the vertical immortal to placements because why not removed the GPS…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
UPDATE May 2022:
- rebuilt and cleaned up
- I re added the vertical immortal to placements because why not
- removed the GPS holder as I found my sat performance was pretty poor near the GoPro. In spit of making sure all connections were off on the GoPro 8
Remixed from and inspired by:
https://www.thingiverse.com/thing:3704334
https://www.thingiverse.com/thing:4364136
https://www.thingiverse.com/thing:4701585
- Removed vertical immortal T options. I didn't seem to ever use them or have a need for them.
- Adjusted the base to keep TPU to a minimum
- Added 5mm nut seat to help secure to top plate and not require additional zip tie
- Cut out VTX slot to allow for a UNIFY HV rather than just the UNIFY V3
Recommend 3M washers to help secure mount.
Print Settings
Resolution:
200
Infill:
20
Filament: PolyMaker PLA
Category: R/C Vehicles