Tango 2 Travel + Gimbal Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wasn't thrilled with any of the designs I was seeing and needed something a little more robust in order to feel…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wasn't thrilled with any of the designs I was seeing and needed something a little more robust in order to feel comfortable putting this in a pack while hiking or off road. Had quite a few iterations on sub-parts and I'm happy with this latest full rev.
- This has a 12mm openning to allow for my lotus ends, but it grips primarily (still intentionally loose) at the bottom. So should work with stock ends without need for modification
- It works without the body brace. Just as good as other designs on TV.
- Recommend to print in TPU. PLA might be to rigid to allow snap fits and getting around gimbals
- To easily remove just slide the throttle gimbal up, pop off top hook near antenna, and pull back while sliding out from under throttle gimbal.
***Don't be cheap like me. Just get the Tango 2 Pro with folding gimbals. In hindsight I wish I would have. But I will would have designed something like this for those off-road trips.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
100
Filament: SainSmart TPU
Category: R/C Vehicles