Camera Quarter Dollar Tripod Plate Driver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy tripod driver to hold a quarter dollar coin
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
For years I've carried a US Quarter Dollar as it fits every tripod plate thumbscrew. Finally got round to making a nifty holder thingy for it.
And, hey - it kinda looks like a tiny camera!
A Quarter Dollar coin snaps into it perfectly if you print it from the attached gcode file with PETG. I used Sunlu White PETG but it should be the right size for other PETG filaments.
The coin snaps into the holder but is easy to remove.
The print is oriented blank-edge down so the hole for the coin faces up and there is a filler in the keyring hole which needs to be removed with a small screwdriver or 6 mm drill bit.
Note that there is a slight crack visible in the photo due to my using a too-large screwdriver to remove the keyring hole filler. My bad! I don't use the holder on a keyring so it doesn't matter to me. I blame it on Sunlu's brittleness, and I couldn't be bothered reprinting it.
If you want a different coin to fit please feel free to email me at [email protected] with your desired coin and I'll do my best to source the correct size.
Regards, Paul