Spice rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want a simple spice rack holder for your 3mm threaded rod? I gotcha!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some 3mm threaded rod left over from another project and needed a spice rack in my pantry… Tada!
There is a separator in here, I originally thought it might support the rods, but my inner OCD wouldn't let me make it load-bearing as there was no symmetric way of making that work.
If I were designing this from the start, I probably wouldn't use 3mm rod as it's a little flimsy over a distance… Just use a shorter distance... If there is any interest, I can redo the model with other hole sizes. Let me know.
The sides are designed to be stuck to the door/wall/whatever with large command strips that will support a kilo… The rod will give out first :)