1 / 11
Zero Two Horns and Headband
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional Materials: 4 x 0.25" or 6.3mm Neodymium magnets Super Glue Craft Foam Assembly Print the headband and the…
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 362
- Wydruki
- 0
- Wyświetlenia
- 1848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (45)Powiązane
Additional Materials:
- 4 x 0.25" or 6.3mm Neodymium magnets
- Super Glue
- Craft Foam
Assembly
- Print the headband and the horns.
- Glue 2 magnets into the headband.
- Glue 2 magnets and the horns to a strip of craft foam to be placed under the wig.
Step 3 is hard to describe but the purpose was to have the horns stick out from under the wig, and the headband will slide over. The magnets on the headband and under the wig will hold the headband in place.
Category: Costume