Quick-Print Self Watering Planters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A self-watering planter design that eliminates complexity by combining multiple parts into one piece.
- Ocena
- 4,833 / 5
- Polubienia
- 167
- Pobrania
- 1138
- Wydruki
- 13
- Wyświetlenia
- 4440
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print.
Versions:
Two versions are available: Blank and Faceted. Both function identically, however blank prints faster with less material.
Print Instructions
Filament: PLA or PETG
Supports: None! All my designs are created to 3d print without support.
Perimeters: 3-4 (to achieve watertight seal)
Layer Height: 0.15-0.3mm
Color Change: Add a color change after 10mm on the “Blank” version to replicate the look below. (This is already included in the pre-sliced gcode)
And finally …. share a picture of your print in the comments section. Choosing two different colors for the Self Watering Insert and the Planter is a fun way to make the print pop, and I would love to see any color combinations you come up with.