Desoldertool Spares Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spares box and rack for a common de-soldering tool
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I have just bought a de-soldering tool and like a lot of things now, it comes with little spares like nozzles, filters and cleaning rods. These usually get put somewhere for safe keeping and I never remember where I put them so I thought I would make a little box for them that attaches to the back of the machine.
The Lid is printed in TPU and the top and bottom need separating on three sides, these sides have dotted lines in the places they need separating at. The “Ring” of the lid then fits on top of the box part. I put support blockers around two sides of the box as the little rim at the top of the box prints OK in Cura without them.
It was printed at 0.2mm layer height in PLA+ and TPU