MANTIS RPI Infrared Camera Case (wall mountable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Case comes with a swivel base mount. Printed in Black Matte material. Has vents in the back for cooling the LEDs
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Mantis case features an open frame housing for better cooling of the LEDs. Its swivel base will help you position it on a Pi case, wall or other surface where you can either apply doublesided tape or screws.
For assembly material please see the Assembly Instructions PDF included here.
You will notice that we have a modifier of 3 perimeters on the ball to add more strength.
It is recommended that you print this model in PETG or ABS/ASA as PLA will not provide enough strength and will eventually crack if you mode the head around.
If you are having problems finding the assembly material (square nuts, M2x10 and M2 nuts etc) feel free to reach out to us and we can help you source the parts.
Enjoy!