PDF pattern, STLs, and instructions for wet molding Buck 110/medium multitool sheath (Leatherman Fuse/Wingman)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts and Patterns/Instructions (PDFs) to wet mold leather and make a case/sheath for a medium multitool or Buck 110.
- Ocena
- 0 / 5
- Polubienia
- 168
- Pobrania
- 1045
- Wydruki
- 1
- Wyświetlenia
- 5940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached).
Finished inside dimensions are:
- Medium Multitool 4 x 1.3 x .7” (102 x 32 x 18mm)
- Buck 110 5 x 1.3 x .6” (127 x 32 x 15mm)
Includes:
- STL files to 3D print wet mold components (multiple options available)
- PDF patterns to make to different versions: Lined and Unlined.
- Instructions in the form of a document (there is NOT an accompanying instructional video).
I made the PDFs for the leather pattern in Inkscape - just a pretty basic design. I made the STLs in Fusion - also a pretty basic design.
This is recommended for an intermediate skill level. Instructions are detailed and the price reflects the lack of video guide.
2 sets of STL files are included: BaseForm, Form, Mold, FormTrim, and Jig are in Med3D.zip. BaseForm110, Form110, and FormTrim110 are in 110.zip. Only the Form/110 and Mold are needed but the FormTrim/110 and Jig make assembling a bit easier.