Yet Another Squashball Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lots of these out there, many were just not right for what I needed so I quickly designed a simple one to meet my needs.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lots of these out there, many were just not right for what I needed so I quickly designed a simple one to meet my needs.
This was designed for my Two Trees SP-5 but should work for any printer that has room for the 25mm diameter base that mounts flush up against the bottom of the printer and uses a single M4 screw in the center for mounting.
If you print them ball-side up it probably won't need support (I didn't, and that was stupid). Printed in Prusament Galaxy Black PLA but can probably printed in be any material you want