Ice Maker Auger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer and beefier auger to replace the broken one on my ice maker
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 1004
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The auger in my ice maker decided to stop living and broke itself into pieces. I designed this one to fit onto the remaining plastic parts of the old auger. I simply used hot glue to attach the new auger on top of the old plastic shaft. This will likely not work for everyone and be specific to my ice maker, with a 13 mm diameter shaft. For the entire length of my ice maker, I printed two of each piece.
**IMPORTANT**
3D printed parts are not food safe and I am not responsible for any toxin or pathogen leaking onto ice from printed parts. Print and use at your own risk. I recommend printing in PLA from a known good supplier, but this still is not a guarantee of food safety.