18650/21700/26650/26800 snap holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2x holders for popular lithium ion battery cell types: 18650, 18350, 21700, 26650, 26800
- Ocena
- 4,889 / 5
- Polubienia
- 350
- Pobrania
- 1821
- Wydruki
- 11
- Wyświetlenia
- 9562
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
You can buy these from me here!
Consider supporting us on Patreon!
These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800.
I print these out of PETG for the toughness. My builds use a 0.6mm nozzle and 0.2mm layer height for the battery holder body, and 0.4mm nozzle with 0.2mm layer height for the lid.
These do require an extra screw for the hinge. I use a stock part from Mcmaster-Carr.
Some people have asked about metric screws. I think this metric screw from Mcmaster-Carr will work, but I have not tried it. It could require some drilling to get it to fit. Let me know if you give it a try!