54mm Minimum Diameter Rocket Motor Retainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 54mm minimum diameter motor retainer for high power rocketry.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For use with 54mm threaded forward closures from Aerotech, CTI, and Loki Research in high performance minimum-diameter rockets.
Printing and installation:
-Use a higher temperature material like PETG, Nylon, ABS, or Polycarbonate (all testing conducted with NylonX and Prusament PC-CF)
-Supports are required
-Be sure to rough the outside surface of the retainer, as well as the inside surface of the airframe tubing, with a medium-grit sandpaper before adhering with epoxy
-Use an appropriate length ¼"-20 bolt to secure the motor retainer to the casing. The single through-hole design allows for easy swapping between bolts, eyebolts, and threaded rods of different lengths for different length motors.