Prusa I3 MK3S noise reduction feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These work with the grey soft rubber feet that came with the machine. They are softer and provide better noise…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
These work with the grey soft rubber feet that came with the machine. They are softer and provide better noise reduction than just using the grey feet.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Yes
Resolution:
0.3
Infill:
10%
Filament:
eSun TPU
Notes:
Printing bottom fillet is always hard with TPU. I set bridge overhang speed to 5mm/s, it printed bottom fillets perfectly. 0.2mm support contact z distance worked very well due to the slow bridge printing speed too.
2 perimeters, 3 top layers and 2 bottom layers. Infill pattern is Gyroid.Category: 3D Printer Accessories