Improved De-soldertool spares box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box and rack to store the spares for a version of a desoldering machine
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I have remixed this to make it a bit easier to produce and use. I have increased the “rim” around the box and the matching slit in the lid to make it fit better. I have also added a lip to make the box easier to open. I have also moved the position of the box to the other side of the machine as I only noticed after uploading it that it was partly covering the fan outlet on the machine.
The Lid is printed in TPU and the top and bottom need separating on three sides, these sides have dotted lines in the places they need separating at. The “Ring” of the lid then fits on top of the box part.
It was printed at 0.2mm layer height in PLA+ and TPU