1 / 2
Ultra Compact Screw Gage Keychain, M2-6, up to 50 mm — zdjęcie 1
1 / 2

Ultra Compact Screw Gage Keychain, M2-6, up to 50 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A more compact version of my previous design utilizing both sides of the part for measurements.

Ocena
4,667 / 5
Polubienia
11
Pobrania
81
Wydruki
3
Wyświetlenia
494
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This tool is made to be as compact as possible and so it takes the level of detail the Prusa Mini with the 0.4mm nozzle can produce to the edge. Some of the numbers may come out a bit sloppy but should be entirely readable.

 

Design

In order to decrease the size of the tool I added the holes for the nuts on the bottom side of the print and made the bottom text recessed to avoid supports and the color change. In order to avoid supports I added a chamfer inside of the nut sockets.

The bottom text includes the screw's/nut's metric size above the hole and the standard thread pitch below it.

Instructions

Use 0.05mm layer height but use the variable layer height tool to make all layers that don't include text to 0.25mm. In order to make the text on the bottom side of the print easier to read I highly recommend setting the elephant foot compensation to 0.3 instead of the 0.2 default.

The G-code here includes these settings and prints without supports. This may result in some stringing around the keychain hole but the strings are easily removed. If this bothers you the mf3 file can be edited and supports can be added.

Tagi