Larger RAMBO case for MK2S / MK2.5S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger case for the electronics of my Prusa MK2.5S inspired by XY Case by Carter.
- Ocena
- 3 / 5
- Polubienia
- 11
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I was searching for a larger electronics case for my Prusa MK2.5S and found this XY case by Carter : https://www.printables.com/model/1910-yz-case
I was not sure if it would fit on the MK2.5S, so I decided to redesign my own case in Onshape.
All parts are printer in PETG. Minimal supports are required to print the base.
For the assembly, you will need some M3 brass inserts in most locations as well as some normal M3 nuts and screws.
You can get the 3Dmodels in onshape from the following link :
https://cad.onshape.com/documents/4c4a41f7104d4f632d96a985/w/6f616a49e4eb4f8a129eb47f/e/ebb33482a662fd58b2cc782a?renderMode=0&uiState=62ab805542cf476aed957b60