Ryobi P306/RGLM18 Glue Stick Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory for on-board storage of extra glue sticks for the Ryobi P306/RGLM18 compact glue gun
- Ocena
- 4,875 / 5
- Polubienia
- 105
- Pobrania
- 234
- Wydruki
- 8
- Wyświetlenia
- 1390
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
General
This is a remix but I ended up re-drawing it from scratch with that model as inspiration when I realized I wanted to change several things. Mine has smaller holes to accommodate my 6" long glue sticks which are 7mm in diameter where as the linked model had holes for 8mm diameter sticks. I also corrected an issue it had with the back indentations being too deep which caused them to leak into the stick cavities when sliced. I made the back shell thicker to remedy this on my design.
Print Instructions
I printed mine in PLA and it has held up great. No supports needed anywhere.
I suggest printing a small sliver of the model first to check the fit with your glue sticks and adjusting accordingly. I sized the holes to fit my 7mm sticks snugly so they don’t fall out
Assembly
A little hot glue attaches it easily to the side of the Ryobi base.