1 / 3

BTT TFT24 Ender3 case

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hi, This is a remix of Steffenbodekaer case for the TFT 24 from big tree tech. I used the V1.1 of the TFT24.

Aktualizacja u źródła: 17 cze 2022

Informacje o modelu

Hi, This is a remix of Steffenbodekaer case for the TFT 24 from big tree tech.

I used the V1.1 of the TFT24.

you will need :

2X M5x15 screws (to attach the case to the printer)

3X M3 insert (link below)

3X M3x12 CHC screws

This case is to be used with M3 thread insert like these ones :

Size: M3 X D4.6 X L5.0

Place the insert in the hole of the top part, heat it with soldering iron like in this video: https://www.youtube.com/watch?v=iR6OBlSzp7I

1/ install the insert in the top part (with soldering iron)

2/ Install the bottom part on the printer with the two M5x15 screws

3/ install the TFT24 in the top part

4/ pass the rs232 cable thru the bottom part

5/ plug the rs232 cable in the tft

6/ put the top + tft on the bottom part and bolt the M3x12 screws

Category: 3D Printer Accessories