Halo Emile Full Armour
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High Zang, I have done what I can on this model thus far to the best of my ability, there were errors that I've fixed…
- Ocena
- 0 / 5
- Polubienia
- 414
- Pobrania
- 1588
- Wydruki
- 0
- Wyświetlenia
- 10 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
High Zang, I have done what I can on this model thus far to the best of my ability, there were errors that I've fixed as best I could, but I would check left and right components in case one is better than the other. That way you can replicate and mirror the file where possible.
I've also included the files prior to the final smoothing which may be adequate, but you can deside.
The 3MF file Compressed to 54mg from 183mb stl file and was the best way for me to upload it to thingyverse as a 3MF file. You can open in Windows 3DBuilder and save it as an .STL and it will expand back out to 183mb. I'll get to the other models where I can. let me know what you think and or where we can improve, Cheers Jace