Intex Pool Pump Impeller (SA3766)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement impeller for an Intex pool filter pump, model SA3766. Also under brand name Aqua-Leisure. I…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement impeller for an Intex pool filter pump, model SA3766.
Also under brand name Aqua-Leisure.
I printed this in PETG. PLA may not last very long in the pump.
I've attached the gcode to print this on my Ender 3 Pro.
Print with outer walls first to ensure accurate dimensions.
You may need to adjust your horizontal expansion to adjust the fit depending on you printer.
It should have a slightly loose fit.
Assembly
Print the 2 parts, then insert the main piece into the permanent magnet, then insert the bottom piece under the magnet, as shown in the attached images. Then slide it onto the metal shaft and insert back into the pump.
How I Designed This
TinkerCAD
Category: Replacement Parts