PANDEMIC - Sleeved Cards Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resized in Cura slicer based on scaling from rhythmicdevil's posting. Kudos to both OPs. I loved ittoK's design work,…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Resized in Cura slicer based on scaling from rhythmicdevil's posting. Kudos to both OPs. I loved ittoK's design work, but I sleeve my cards for protection, which increases the size of them. I used UltraProStandard Gaming sleeves at 66x91mm. They also make the storage requirements taller than the space in the box, so the lid will not now sit flush. An alternative would be to bag the sleeved cards and have these holders separate ready for the gaming session to stop the deck sliding in disarray (another issue with sleeves).
Print Settings
Printer Brand:
Creality
Printer:
CR-10 Mini
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28
Infill:
20% Cubic
Filament: Anycubic PLA Sky Blue
Notes:
I use rafts for the moment as brims and skirts are causing me problems just now. I've printed these at 0.28mm layer height and 205'c after I gave up printing hotter and faster.
Category: Toy & Game Accessories