1 / 4
Replacement Side Cover for Sony WH-XB900N
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement side covers for the Sony WH-XB900N that I made after the originals broke.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 873
- Wydruki
- 6
- Wyświetlenia
- 3327
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (38)Powiązane
Replacement part that I designed to save my headphones. Other replacement parts were either out of stock or too expensive so I made my own.
Assembly
- Fold the ear cup in and remove the 2 black screws near the swivel joint.
- Separate the inner and outer halves. Then remove the 2 silver screws on the metal swivel joint bracket.
- Separate ear cup from the inner side cover.
- Cut or break the outer side cover to free the wire. (I cut a slot in the part with a pair of flush cutters to free the wire without destroying the part.)
- Slide the old outer side cover off the rail.
- Feed the wire through the slot in the new outer side cover and slide it onto the rail.
- Press the swivel joint bracket into the inner side cover and reinstall the 2 silver screws.
- Reassemble the 2 haves and reinstall the 2 black screws near the swivel joint.
Print Instructions
Supports: Yes
Resolution: .2 to .12
Infill: 100%
Notes: Overhangs print best at higher resolutions (0.12 mm).