DeWalt portable tablesaw clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of clips to hold down a DeWalt DWE7480 10" portable tablesaw.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a set of clips to hold down a DeWalt DWE7480 10" portable tablesaw.
It's a compact saw but that means it is prone to shifting when ripping long material. I found it a pain to use the screw holes to secure it to my mismatched stand as I use my tablesaw almost every day. The front is more prone to lifting when the weight shifts to the back end close to the end of a long rip while the back is more subject to sliding. The front clips go over the frame and the back clips alow quick clip/unclipping of the saw while stopping it from sliding back.
I printed them in PETG for temperature resistance and strength. I'd recommend using a reasonably thick wall too. Print them on their sides and no support is required.
They should also fit the other model saw with a 16" rip capacity as they have the same frame. Included is the freecad file if you so feel like messing with it to fit your portable table saw.