Tomica Ferrari Enzo Display Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display is designed for Tomica Ferrari Enzo
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 760
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Parts
If you want the base to fit a different Ferrari Enzo casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV4-Stripe.STL
2) Base back wall:
-BoxBackAssem.STL
For alternate back wall, the 90 Years back wall from Ferrari SF90 display fits in perfectly too: https://www.printables.com/model/210494-tomica-ferrari-sf90-stradale-display-ferrari-90-ye
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV4-Stripe":
1) Start (Left stripe, mine is in red)
2) Layer 11 (Middle stripe colour, mine is in white)
3) Layer 16 (Right stripe colour, mine is in green)
4) Layer 21 (Overall base colour, mine is in black)
5) Layer 26 ("Ferrari" lettering colours, mine is white)
Filament change layer for colours on "BoxBackAssem":
1) Start (Stripes background colour, mine is in black)
2) Layer 6 (Overall background and lowest stripe colour, mine is in red)
3) Layer 9 (Top stripe on base and Ferrari logo, mine is in green)
4) Layer 14 (Center stripe of base and Ferrari logo colour, mine is in white)
5) Layer 19 (Ferrari logo background, mine is in yellow)
6) Layer 24 (Ferrari logo outline, horse and Enzo logo, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/