Electronics Enclosure (iPhone UK charger)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small electronics enclosure that piggybacks on the iPhone USB charger (UK version).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small electronics enclosure that piggybacks on the iPhone USB charger (UK version). if you have a small electronic project (motion sensor in my case), you can use this enclosure to house the electronics and power adapter all-in-one.
The power adapter should follow the formfactor of the iPhone UK charger ,I actually had one with the USB port on the back of the charger instead of being on the bottom, that's why I have a short and long version. there is also a deeper version of each incase it's too small for your parts.
Printed with no supports, infill is 10 or 15 %.
Best of luck.