FW3A Tactical Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold on tight to your FW3A! This is a tactical ring for the famous FW3A (and similar lights using the same tailcap).
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 494
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hold on tight to your FW3A! This is a tactical ring for the famous FW3A (and similar lights using the same tailcap).
It is based on my Noctigon KR4 Tactical Ring design, but recreated with FreeCAD and adapted for the FW3A.
Comes with lanyard hole as well! There are versions with one, two and three lobes.
Print in 0.1 mm to get the correct thickness. No supports required. Assembly is easy: Screw off the head and tailcap, remove a previously installed clip or lanyard ring, put on the tactical ring (flat side towards head) and screw everything back together (starting with the tailcap).
Do you think a tactical ring too much for your FW3A? Then try this lanyard ring which is based on this model.
Category: Tools