1 / 6
Buckle for 25mm strap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement buckle for a backpack. It is designed for a strap with 25mm width. Check the print settings for…
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 440
- Wydruki
- 2
- Wyświetlenia
- 1394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (1)Kolekcje (68)Powiązane
This is a replacement buckle for a backpack.
It is designed for a strap with 25mm width.
Check the print settings for more stability!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Maertz PLA black
Notes:
Print it flat on the bed and not upright, in order to have the forces of the belt in the same direction as the sliced layers.
Use four walls to get a strong part.Category: Sport & Outdoors
