1 / 6
Bike Bottle holder 80mm — zdjęcie 1
1 / 6

Bike Bottle holder 80mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bottle holder for 80mm Zounich water bottle. Rod diameter on the Bike: 36mm. Mount it via integrated zip tie guidings.

Ocena
4,75 / 5
Polubienia
87
Pobrania
623
Wydruki
7
Wyświetlenia
4030
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Bike Water Bottle Holder

This remix is inspired by kf7wrw's Bike water bottle holder v2.

I decided to create a remix to fit the diameters of the bottle and bike to my needs, because the bike has no threaded mounting.

Intended Bottle

Zounich 25 oz, 700ml, 80mm diameter

Intended Bike Rod Diameter

36mm

Additional Features

  • Small hole, so rain water may drain
  • More holes for zip ties for tight fit
  • No support needed

Mounting

I added two strips of 1mm x 6mm x 80mm foam tape, to keep the bottler holder steady.

The zip ties hold the part in place

Printing 

Rafts: No

Supports: No supports are required for the whole part, if your printer is well tuned.

Resolution: 0.28

Infill: 20

Filament: Material4Print PLA grey

Updates

2023-06-11: Reuploaded the stl-file, without “JK21” embossed.

Tagi