1 / 2
Procedural Roots Succulent Pot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by plant roots and poison ivy, these are some procedurally modeled pots/planter decorations.
- Ocena
- 5 / 5
- Polubienia
- 132
- Pobrania
- 324
- Wydruki
- 1
- Wyświetlenia
- 2640
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (199)Powiązane
These are specifically sized to fit IKEA's succulent plants, but they should be very easily resized in either a slicer or 3D application.
Modeled procedurally using Houdini, they're inspired by plant roots and poison ivy.
I have modeled three different versions:
- root_pot_vase: The easiest to print. Vase-mode compatible, and will be able to be used as an actual pot.
- root_ornament_thick: A bit harder to print, this is actually an ornament for an existing ceramic/plastic pot. You can place your existing pots inside. You need retraction settings well tuned or a way to get rid of fine stringing to print this one.
- root_ornament_thin: Quite a bit harder print, may be better suited for resin printing. I managed to print it on my MK3S+, but it was quite stringy and not very strong.
You shouldn't need supports on any of them!