Skadis holder for a M1 MacBook Air
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds your MacBook Air on a Skadis peg board
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 1444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holds your MacBook air on a Skadis peg board. The inside of the holder is printed in TPU, this gives a soft cradle for the MacBook. The TPU are push in place. No glue is necessary.
This has held my MacBook for weeks without issue, but hanging your MacBook on a piece of 3d printed plastic is at your own risk!
Print files are for a .6 mm nozzle! It can be printed in a .4 but you'll have to slice it your self. The sliced TPU file is for TPU 95A, if you plan on using a softer flex, again you need to reslice. The holder can be printed in PETG too, I just like the added stiffness of the PLA.