TBS Source One V5 SMA Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will hold a TBS SMA adapter and Crossfire Immortal T antenna
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 448
- Wydruki
- 0
- Wyświetlenia
- 1741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Doesn't seem to be any STL's available for the TBS source one V5, learnt how to use fusion 360 and made this. Print in TPU with supports in the upright position and your own printer settings.
Fits the TBS source one V5 with a TBS SMA adapter and a crossfire Immortal T antenna. Slides over the posts and is the full height so won't slide about. There is a slot for the power cable to come out the back of the top plate.
A relief cut needs to be made once printed to get the CF antenna in. The fitment is tight so shouldn't be any issues with it coming out in crashes. I will add a slot for a zip-tie if needed.
Sliced file worked fine on my modified Ender 3 fine, check it with your own slicer to be sure.