Piranha Plant Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small carnivorous chomper plant-based pot and insert for relatively tall plants or plants that do not like too much sun.
- Ocena
- 0 / 5
- Polubienia
- 96
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 2666
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Mario style flower pot that allows you to make all plants into piranha plants (not really).
Simply put some dirt in the pot with your plant, then put the mouth insert on top!
Extra points if you print it multicolor or paint in the white parts after.
Printing the mouth works pretty well if supported and printed up side down, but alternatively, you could print it right side up with supports to have less visible surface marring. I recommend printing it at 100% Scale minimum as it is quite a small pot to start with, but you can go up as high as you like from there.