Gloomhaven Walls: Flat Walls 3 Hex End Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a three-hex flat edge wall piece for the board game Gloomhaven. A number of scenarios have two-hex wide…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a three-hex flat edge wall piece for the board game Gloomhaven. A number of scenarios have two-hex wide tunnels (e. g. Map Tile A) that are dead ends. Making walls at the dead ends using the great pieces available from rbross / paralepsis requires three separate single-hex tiles. I used MeshMixer to create a single three-hex end piece from their postings that does the job. I added a skull from aaskedall for fun. Wife did the painting.
The second photo shows the piece in position at the top of the picture.
Edit: Uploaded a new version of the .STL file to correct for manifold errors. (8/14/22)
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.8 mm
Infill:
20%
Filament: Hatchbox PLA Stone Gray How I Designed This ===================
Select .STL files posted by rbross / paralepsis were manipulated in MeshMixer, and the skull was added with MeshMixer too.
Category: Games