1 / 2
Breville / Sage Barrista Grinder Gear (BES875 / BES880) — zdjęcie 1
1 / 2

Breville / Sage Barrista Grinder Gear (BES875 / BES880)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Breville / Sage Barrista Grinder Gear. Supported models: Express (BES875), Touch (BES880)

Ocena
4,5 / 5
Polubienia
33
Pobrania
725
Wydruki
2
Wyświetlenia
3056
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Breville / Sage Barrista Grinder Gear. Supported models:

  • Express (BES875) - tested

  • Touch (BES880)  - confirmed by others

These are not available as a separate spare part from Breville (Sage), but are the first to fail if the grinder gets jammed for whatever reason, despite the other gear having a built-in clutch, which should prevent this.

PC provides best results in terms of quality / durability. PLA is second best and cheaper. I had one of these (in PLA) fail, due to a stone jamming the burrs, and after disassembly there was no visible wear on the undamaged teeth after 6kg+ of coffee going through the machine.

Versions

v1 is closest to the original in design, and provides best results with high quality filament like Prusament, and printers capable of keeping tight tolerances.

v2 is simplified for (a little) faster printing, has updated dimensions and looser tolerances. If unsure this is the version to use. 


Notes

  • These are OK printed from PLA, PETG, ABS/ASA, PC

  • In my own use PC gives best results in terms of quality and longevity

  • I print these with

    • 3+ perimeters

    • 20%+ gyroid infill

    • 0.8mm minimum shell thickness

    • supports enabled on build plate only

  • Regardless of version it's advisable to chase the shaft hole with an 8mm drill bit before assembly. 

  • Both versions have been tested in an actual device, and work just as good as the original.

How I Designed This

I've used Fusion 360 to design this. The smaller top gear was designed using the built-in SpurGear add-in, and the main gear was designed using the free "Helical Gear Generator" add-in by Ross Korsky, available on Autodesk App Store. Then it was just a matter of combining the two main bodies and ensuring proper tolerances.

Category: Replacement Parts

Tagi